Automatic Gate Repair in Plano, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Automatic Gate Repair in Plano, TX

Our How Much Does Gate Repair Cost? (2026 Price Guide) - Plano, TX shows that automatic gate repair in Plano typically runs between $250 and $850, depending on whether the issue stems from a failed control board, a misaligned photo-eye, or a stripped gear assembly. At Vance Gate Repair Plano, we provide a written price before any work begins, ensuring you know exactly what you are paying for before a single tool is picked up. If your gate is stuck, making grinding noises, or failing to respond to your remote, call (972) 236-7089 to schedule a technician who documents every adjustment and provides a detailed photo record of the repair.

We operate as an independent service provider under the Haven Standard. This means we do not offer verbal estimates or handshake deals. Every client receives a written scope of work and a fixed price before we start. Whether you need help with a residential swing gate in a neighborhood near Legacy Drive or a complex sliding gate system in an industrial park off Highway 75, we apply the same commercial-grade documentation standards to every job. You can find more information about our general services on our home page or our primary Gate Repair in Plano page.

When You Need Automatic Gate Repair

Automatic gates in Plano face specific challenges. Between the rapid temperature swings that affect metal expansion and the heavy clay soil that can shift gate posts over time, these systems require precise calibration. We see the same patterns of failure regularly. If you notice these symptoms, you likely need Gate Realignment or another professional assessment:

• The gate stops or reverses mid-cycle: This often indicates that the photo-eyes (the infrared safety beams) are misaligned or obstructed by debris. In Plano, we frequently see vegetation growth or high winds knock these sensors out of alignment, causing the motor to trigger a safety stop.
• Grinding or scraping noises: If you hear metal on metal, your gear assembly or chain drive may be failing. This usually points to a lack of lubrication or a stripped gear that has been under stress for too long.
• Gate refuses to open or close: This is often a logic board or power issue. If the motor is dead, we check the transformer and the circuit board for signs of a power surge, which is common during North Texas thunderstorms.
• The gate moves too slowly: If the gate is dragging or moving significantly slower than usual, the issue might be the capacitors or the motor itself losing torque. We test the capacitor voltage to see if it is delivering the necessary starting power.
• Remote or keypad unresponsiveness: If the gate works manually but not with your remote, the issue is likely with the receiver or the antenna connection. We check these connections for corrosion before suggesting any hardware replacement.

Because gate systems involve high-voltage electricity and heavy mechanical components, we urge caution. If you suspect a major electrical fault or if the gate is physically sagging, do not attempt to force it open or closed. High-tension chains and heavy gate leaves can cause significant injury. Call (972) 236-7089 to have a professional technician inspect the system safely.

Our Automatic Gate Repair Process

We do not guess at problems, and we do not leave homeowners wondering what was done. Adrian Vance founded this company on the principle that if a job is worth doing, it is worth documenting. We follow a strict, five-step process for every Gate Repair services call in Plano.

1. Site Inspection and Testing: Our technician arrives and runs a diagnostic check. We test the gate’s travel limits, the motor’s voltage output, and the safety sensors. We identify the specific point of failure rather than replacing parts randomly.
2. Written Scope and Price: Per Haven Standard Clause 1, we provide a written estimate before we pick up a tool. This document outlines exactly what parts are needed, what labor is required, and the total cost. You approve the price in writing before we begin.
3. Repair and Calibration: We perform the repair using the correct parts for your system. Whether it is a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule system, we use the specific manufacturer’s procedure. We do not use “universal” fixes that compromise the system’s integrity.
4. The Photo Record: Under Clause 4 of the Haven Standard, every visit includes a documented photo record. We photograph the gate, the motor, the wiring, and the final settings. We leave a copy of this record with you, and we keep a copy in our job file. If you ever need service again, the next technician will know exactly what was done previously.
5. The 365-Day Done Right Promise: We stand behind our work for one full year. If the repair fails or is not performing as promised within that 365-day window, we return to make it right at no additional charge to you.

Before

After

Automatic Gate Repair Pricing in Plano

We believe in upfront pricing. You will never receive a surprise invoice after we finish. While every gate system is different, we can provide standard ranges for common Electric Gate Repair needs in the Plano area. These prices cover labor and parts.

These ranges account for the different brands we service. For example, a control board replacement on a commercial-grade Viking motor may cost more than on a standard Mighty Mule unit due to the complexity of the board. We provide an exact, written quote after our initial inspection. If you have a written estimate from another company, we are happy to provide a free second opinion. Bring the paperwork to our visit, and we will review the scope to see if the work is truly necessary or if a simpler, more cost-effective solution exists.

FAQs - Automatic Gate Repair

Is it cheaper to repair or replace my automatic gate motor?

Repair is almost always the better option if the motor housing is sound and the gate frame is in good condition. We can often replace internal components like capacitors, gears, and logic boards for a fraction of the cost of a full system replacement. We only recommend replacement if the motor is obsolete, parts are no longer manufactured, or if the cost of the repair exceeds 60 percent of a new unit’s price. Call (972) 236-7089 for an assessment of your specific system.

How quickly can you come to Plano for a repair?

We answer our phones 24 hours a day, seven days a week, and we prioritize service based on urgency. If your gate is stuck in the open position, leaving your property unsecured, we treat that as an urgent service request. We do not use callback queues or automated voicemails. When you call, you speak to a live person who can schedule your visit.

Do you work on all gate brands?

We service nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep our technicians trained on the specific wiring diagrams and limit-setting procedures for each of these manufacturers. We do not steer you toward a specific brand; we work on what is already on your property.

What happens if the repair stops working?

We offer a 365-Day Done Right Promise on all our completed work. If the repair does not hold up or if the gate is not functioning as we agreed, we return to fix it at no additional cost to you. This promise has no expiration date within that 365-day window and no hidden exclusions. We document our work so we know exactly what we did the first time, making the follow-up process simple and transparent.

If you are ready to get your gate working properly, do not wait for a minor issue to become a major failure. Our technicians are ready to provide a documented, written estimate that respects your time and your budget. Call (972) 236-7089 today for a free estimate on your automatic gate repair.

Written by Adrian Vance, Owner at Vance Gate Repair Plano, serving Plano.