Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHinge & Post Repair in Plano, TX
Hinge and post repair in Plano, TX typically costs between $350 and $850, depending on whether the issue stems from a simple hinge adjustment or a compromised structural post that requires concrete reinforcement. When a gate in Plano begins to drag, sag, or fail to latch, the root cause is almost always found in the connection between the gate frame and the support post. At Vance Gate Repair, we specialize in diagnosing these structural failures accurately before any work begins, ensuring you never pay for a repair that doesn’t fix the underlying problem.
If your gate is leaning, hitting the pavement, or refusing to close, call (972) 236-7089. We provide written, upfront pricing for every job, ensuring you know exactly what you are paying for before we turn a single wrench. Our team serves the entire Plano area with a focus on restoring structural integrity to your driveway entrance. For a broader overview of our services, you can visit our main Gate Repair page.
When You Need Hinge & Post Repair
In North Texas, our soil composition-heavy clay-creates specific challenges for gate installations. As the soil expands and contracts with our seasonal moisture levels, gate posts can shift, tilt, or pull away from their original plumb position. This movement puts immense stress on the hinges, which are designed to support the weight of the gate, not to act as structural anchors. If you notice any of the following symptoms, your gate system likely requires professional attention to prevent total failure.
- The gate drags across the driveway: This is often the first sign that a post has tilted or a hinge has fatigued. If the gate touches the concrete, the friction will eventually burn out your motor.
- The gate fails to latch or lock: When the post shifts even half an inch, the latch receiver will no longer line up with the gate. We see this frequently in older Plano neighborhoods where the original concrete footings have settled.
- Visible gaps at the hinge point: If you see a gap between the hinge plate and the post, or if the bolts are pulling out of the steel, the structural integrity is compromised. This is a safety issue that requires immediate correction.
- The gate makes a grinding or popping sound: This often indicates that the hinge bearings are shot or the hinge pin is bent. Ignoring these sounds usually leads to the gate dropping suddenly.
- The gate is “bouncing” when it opens: This indicates that the support post is loose in the ground. When the motor engages, the entire post moves, creating a visible wobble that will only get worse with time.
A gate that is not properly supported is a danger to vehicles and pedestrians. Because these components carry significant weight-often hundreds of pounds-we strongly advise against attempting to “tighten up” a leaning gate yourself. If the post is unstable, it can tip unexpectedly, causing serious injury. Our technicians are trained to secure the area, assess the structural load, and perform the necessary welding or concrete work safely.
Our Hinge & Post Repair Process
At Vance Gate Repair, we operate under The Haven Standard. This means we do not offer verbal guesses or vague estimates. We document every step of the repair process, leaving you with a clear record of what we found and how we fixed it. When you call us for hinge or post repair in Plano, you can expect the following workflow.
- Structural Assessment: We arrive at your property and check the plumb of the post using a level. We also inspect the hinge welds and the condition of the concrete footing. We need to determine if the post is failing because of the soil, the concrete, or simply a rusted-out hinge pin.
- Written Scope and Price: Before we touch a tool, we write down exactly what is required-whether that is re-welding a hinge, reinforcing a post with a steel sleeve, or resetting the post in new concrete. You receive a written price for this scope (Clause 1 of The Haven Standard).
- Surface Preparation: If we are welding, we grind the area down to bare metal. We don’t weld over rust or paint, as this creates a weak bond that will fail again in six months.
- Execution and Adjustment: We weld or bolt the new hinges into place, ensuring the gate swing is smooth and the latch aligns perfectly. We use high-quality hardware suitable for the weight of your specific gate, whether it is a heavy ornamental iron gate or a lighter aluminum residential model.
- Documentation and Verification: Under Clause 4 of The Haven Standard, we take photographs of the completed repair, the alignment, and the hardware installed. We provide this log to you, so you have a permanent record of the work performed. This ensures that if you ever need service in the future, the next technician knows exactly what was done today.
We work on all major automation brands, including Elite, LiftMaster, and FAAC, ensuring that our repairs don’t interfere with your existing motor or control board. If your gate is currently stuck, call (972) 236-7089 to schedule a technician. We provide free estimates and stand behind our work with our 365-Day Done Right Promise.
BeforeAfterHinge & Post Repair Pricing in Plano
Pricing for gate repairs in Plano varies based on the severity of the damage. We do not use “call for a quote” tactics. We provide flat-rate, upfront pricing for the work required. Below is a guide to what you can expect in terms of market pricing for these specific repairs.
| Repair Type | Typical Cost Range |
|---|---|
| Hinge Adjustment & Re-alignment | $250 – $450 |
| Weld-on Hinge Replacement (per pair) | $350 – $600 |
| Post Reinforcement (Steel Sleeve) | $500 – $850 |
| Complete Post Replacement (Concrete Work) | $950+ |
These ranges account for labor, materials, and the specialized equipment required to handle heavy steel gates. If another company has provided you with a written estimate, we offer a free second opinion. Bring the paperwork to our technician, and we will review the scope of work at no charge to ensure you are being quoted fairly. Call (972) 236-7089 to discuss your estimate.
FAQs - Hinge & Post Repair
How long does a hinge repair take in Plano?
Most hinge repairs and alignments are completed in a single visit, typically taking between two to four hours depending on whether we need to cut and re-weld the existing hinges. We arrive with a fully stocked service vehicle, so we rarely need to leave for parts. If you are noticing your gate dragging, call (972) 236-7089 for a same-day or next-day assessment.
Is it cheaper to repair the post or replace it?
Repairing a post is almost always more cost-effective than a full replacement, provided the internal integrity of the steel is still sound. We often use steel sleeves to reinforce a post that has started to tilt, which saves you the expense and mess of digging up concrete. We will always present the most durable, cost-effective option after we inspect your gate in person.
Can you fix my gate if it was installed by another company?
Yes, we service all gate makes and models, regardless of who installed them. We have experience with major brands like Mighty Mule, LiftMaster, and Linear, and our technicians are trained to troubleshoot any system. We do not steer you toward replacement unless it is truly the only way to restore safety and function.
What does your 365-Day Done Right Promise cover?
Our promise means that if the specific repair we performed fails within one year of the service date, we will return and make it right at no additional charge to you. We document every repair with photos and written notes the day we do the work, so there is never any question about what was covered. This is part of our commitment to transparency and quality, ensuring your gate continues to operate smoothly in the Plano climate.
If you are ready to get your gate working properly, do not wait for a minor drag to become a broken hinge or a fallen gate. We are ready to assist. Call (972) 236-7089 today for a free estimate and experience the difference of a documented, professional repair.
Written by Adrian Vance, Owner at Vance Gate Repair Plano, serving Plano.