Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Flower Mound, TX
Gate Access Control in Flower Mound ranges from a simple keypad replacement to a full phone-entry system tied to a LiftMaster or FAAC operator. Most repairs we see here involve equipment installed when these neighborhoods were built, typically between 1998 and 2010, and time has not been kind to the circuit boards. If your gate stopped responding to a remote or keypad, call (972) 236-7089 and we’ll give you a written price before any work starts.
Why Flower Mound Homes Are Different
Flower Mound’s housing stock was built in a particular window. Most subdivisions went up in the mid-1990s through the 2010s, which puts the average ornamental iron gate at 15 to 25 years old. That is exactly when hinge welds fail, gate posts begin to lean, and aging Viking or LiftMaster swing-gate operators reach the end of their service life.
The soil here makes it worse. Flower Mound sits on North Texas black clay, which swells hard after spring rain and shrinks during summer drought. Gate posts heave and lean. Hinges bind. Welds crack. Automated opener arms fall out of alignment, and the same problem comes back every year unless the post is reset properly the first time.
Then there are the HOAs. Communities like Bridlewood, Wellington, Canyon Falls, and The River Walk impose strict aesthetic and material requirements. In many Flower Mound neighborhoods, any visible repair or replacement must be approved before work starts. We prepare that paperwork, and we document what we do with photos on every visit.
Our Main Flower Mound Services
These are the three services Flower Mound homeowners call us about most often. Each has its own dedicated page with full pricing and signs to watch for.
Gate Repair in Flower Mound
Broken hinges, sagging gates, cracked welds, bent rails, snapped opener arms are the everyday reality for 15-to-25-year-old gates in Flower Mound. We repair the gate itself and the hardware, not just the motor. Every job gets a written price before we start. Full detail is on our Gate Repair in Flower Mound page.
Gate Installation in Flower Mound
New construction, a full replacement, or a second gate for a horse property, installation in Flower Mound means HOA approval, black clay soil, and the right materials for North Texas weather. We handle the entire job from permit documentation to final photo record. Full detail is on our Gate Installation in Flower Mound page.
Gate Motor & Opener in Flower Mound
The operator is the part that moves the gate. If your gate is heavy, slow, or stopped entirely, the motor and its limit switches are usually the cause. We service nine major automation brands and we stock parts locally. Full detail is on our Gate Motor & Opener in Flower Mound page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Flower Mound
Gate Access Control in Flower Mound means the hardware that decides who gets in: keypads, remote controls, phone entry, card readers, and video intercoms. Homes built in the late 1990s and 2000s often have original access hardware that has been exposed to Texas heat for two decades, and failed circuit boards here are more common than broken mechanical parts. Black clay shifting can also pull wiring loose at the underground conduit where the access keypad connects to the operator. If your gate works mechanically but won’t respond to a code or a remote, this is usually where the problem lives. We handle all of it under the same written-price standard: what we find, what it costs, and what we leave behind in a photo record. Gate Access Control covers every system we service.
Keypad Entry
Signs you need it
Keypad works intermittently, some digits won’t register, or the code works but the gate won’t move.
What it costs in Flower Mound
Keypad replacement or repair in Flower Mound typically runs $140 to $285 depending on the model and whether the wiring is intact.
How we do it
We test the keypad, check the wiring at the operator, replace the unit or repair the circuit, and reprogram all codes, then photograph the finished setup.
Phone Entry
Signs you need it
Caller can’t hear the dial tone, the gate won’t open from the phone, or the system dials the wrong number.
What it costs in Flower Mound
Phone entry system repair or replacement in Flower Mound typically runs $280 to $620 depending on the hardware and whether new wiring is required.
How we do it
We check the phone line and the entry controller, replace the failed board or handset, reload the directory, and test every entry code before we leave.
What Gate Access Control Costs in Flower Mound
| Item | Typical range in Flower Mound |
|---|---|
| Keypad entry replacement or repair | $140 - $285 |
| Remote control programming or replacement | $85 - $180 |
| Phone entry system repair or replacement | $280 - $620 |
Can you fix a keypad on an older Flower Mound gate without replacing the whole operator?
Yes. Keypads, receivers, and phone-entry boards fail independently of the motor. We replace the failed access component and leave the existing operator in place whenever it still has service life. Call (972) 236-7089 for a written price.
How fast can you get a gate access system working again in Flower Mound?
Most access-control repairs are completed same-day if parts are in stock locally. Keypads, receivers, and common control boards are stocked in our DFW parts inventory. Call (972) 236-7089 and we’ll tell you over the phone when we can be there.
Gate Parts & Welding in Flower Mound
Gate Parts & Welding in Flower Mound covers the steel and hardware that hold the gate together: hinges, posts, rails, rollers, and custom weld work. With most local homes now 15 to 25 years old, we regularly find hinge welds that have rusted through and posts that have shifted on the black clay soil. A gate that drags the ground is usually not a motor problem; it is a hinge or post problem, and welding fixes it. Gate Parts & Welding is one of our most common service calls here.
Hinge Replacement
Signs you need it
Gate sags, scrapes the driveway, or the hinge pin is visibly worn or broken.
What it costs in Flower Mound
Hinge replacement in Flower Mound typically runs $120 to $290 per hinge depending on size and whether the post needs reinforcement.
How we do it
We lift the gate, cut or unbolt the old hinge, weld or bolt the new one in place, test the swing, and photograph the finished work.
Post Replacement
Signs you need it
Post leans noticeably, the gate gap widens at the bottom, or the post wobbles when the gate moves.
What it costs in Flower Mound
Post replacement in Flower Mound typically runs $350 to $800 depending on depth, soil condition, and whether concrete needs to be removed.
How we do it
We dig out the old post, set a new one at the correct depth for clay soil movement, backfill and compact, rehang the gate, and document the result.
What Gate Parts & Welding Costs in Flower Mound
| Item | Typical range in Flower Mound |
|---|---|
| Hinge replacement | $120 - $290 per hinge |
| Post replacement | $350 - $800 |
| Rail repair or welding | $180 - $450 |
Can you weld a broken gate rail in place, or does the gate have to come down?
Most rail repairs can be welded in place with the gate still hung. We grind back the break, weld it, and brace it if needed. Call (972) 236-7089 for a written price.
Why does a Flower Mound gate post lean even after it was repaired before?
Black clay soil expands and contracts with moisture, and a post set too shallow will lean again within a year or two. We set replacement posts deeper and backfill properly to resist the movement. Call (972) 236-7089 to have yours looked at.
Brands We Service in Flower Mound
We work on LiftMaster, FAAC, Elite, and Mighty Mule operators, among nine major brands we service. Common control boards and receivers stay stocked locally, which keeps most Flower Mound repairs same-day when parts are available. Visit our brands page for the full list.
Pricing for Gate Repair in Flower Mound, TX
| Service | Typical range in Flower Mound |
|---|---|
| Keypad entry replacement or repair | $140 - $285 |
| Remote control programming or replacement | $85 - $180 |
| Phone entry system repair or replacement | $280 - $620 |
| Hinge replacement | $120 - $290 per hinge |
| Post replacement | $350 - $800 |
| Rail repair or welding | $180 - $450 |
| Custom welding | $200 - $500 |
| Card reader or video intercom | $320 - $700 |
| Gate roller replacement | $110 - $260 per roller |
In Flower Mound, what pushes a price up is usually the condition of the post or the number of years since the last repair. A gate that has been sagging for years has likely damaged its own hinges and rails. Every price is written and agreed before any work starts, and it does not change unless you approve a change order first.
Neighborhoods We Serve in Flower Mound
We work across Flower Mound, and we know the difference between a Bridlewood estate gate and a Canyon Falls subdivision entry. Typical response time for service calls in Flower Mound is same-day when parts are in stock.
- Bridlewood
- Wellington
- Canyon Falls
- The River Walk
- Flower Mound town center and surrounding subdivisions
Service Area - Cities Near Flower Mound
If you live just outside Flower Mound, we also serve Grapevine, TX, Coppell, TX, Little Elm, TX, and Carrollton, TX. Call (972) 236-7089 and a live person will tell you when we can be there.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Flower Mound
Most Flower Mound service calls are dispatched same-day when the needed parts are in local stock. A live person answers the phone 24 hours a day, so you will know before you hang up when we can be there. Call (972) 236-7089.
In many Flower Mound communities, yes. Material, height, and style changes often require HOA approval before work begins. We prepare documentation describing the repair and the materials, and we deliver a photo record after the job is done, which most HOAs accept as evidence of compliance.
Yes. Bridlewood and other equestrian areas in Flower Mound often have a motorized street gate plus a paddock gate, sometimes wooden or galvanized pipe. We service both, and we carry hardware for ranch-style gates as well as residential ornamental iron.
If your gate is acting up in Flower Mound, call (972) 236-7089. You will get a live person, a written price before any work starts, and a photo record of everything we did before we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Flower Mound Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.