Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Plano Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls service in Plano for swing and slide systems, including the AXDP dual-swing series and HYPRO high-torque slide operators. Our work is built on written prices before any tool comes off the truck and a documented photo record of every adjustment, part number, and limit-switch reading when we leave. We are not affiliated with or authorized by Ghost Controls; we are an independent service provider that sees their equipment daily across Plano’s master-planned subdivisions and knows the specific ways these openers fail in North Texas clay. Call (972) 236-7089 and a live person answers, any hour.
Why Trust Vance Gate Repair Plano for Your Ghost Controls Gate Repair?
We work on Ghost Controls systems often enough that the torque calibration and limit-switch quirks are second nature. The older AXDP boards have a particular failure signature after a close lightning strike: the gate goes completely dead, no LED, no click, because the MOV on the control board sacrifices itself before the transformer does. The HYPRO slide series strips gearbox teeth when the V-track fills with decomposed granite driveway fines, a problem we see constantly in west Plano subdivisions where that material is standard. None of this comes from factory training or any manufacturer authorization. It comes from running calls in Plano since 2014, documenting every failure Adrian Vance finds, and keeping those records so the next visit starts with evidence, not guesswork.
Adrian grew up in Queens and came up through an electronics and industrial controls program at Queensborough Community College before spending over a decade on access-control work. That background means a Ghost Controls board is not a mystery box to us. We read the fault LED pattern, check the limit-switch positions with a meter, and photograph the settings before we change anything. Under Clause 4 of our Haven Standard, every visit includes a documented photo record at no additional charge.
Common Ghost Controls Gate Repair Problems We Fix in Plano
- Photon beam safety eyes losing alignment after clay-soil post shift. Ghost Controls systems use an infrared photon beam pair across the gate opening. When Plano’s Blackland Prairie clay swells after heavy rain, the post holding one eye tilts a degree or two. That is enough to break the beam path and cause intermittent reversal mid-cycle. We realign the eyes and, when the post has moved enough to matter, address the post itself rather than just re-aiming the beam and hoping.
- AXDP control board failures after spring thunderstorms. The AXDP dual-swing series is stout, but its control board sits directly in the path of surges that ride in on the low-voltage line from the house. We replace the board with a genuine Ghost Controls unit because the timing and current-sensing values are factory-calibrated and aftermarket boards do not match them. Then we add surge protection on the low-voltage side, which the factory install often skips.
- HYPRO slide motor gearbox stripping on decomposed granite driveways. The HYPRO series has plenty of torque for a properly sliding gate. The problem is what accumulates in the V-track: fine granite grit packs into the track and the gate drags, the gearbox works harder than it was spec’d for, and the teeth shear. We clear and re-grade the track, replace the gearbox with a genuine Ghost Controls part, and set the torque limiter correctly so the operator stops pushing when it meets resistance.
- Limit switches losing position after a power outage. Ghost Controls limit switches on both the AXDP and HYPRO lines can drift from their set points when the board reboots after a power flicker. The gate then slams at full travel instead of decelerating. We reset the limits, photograph the new positions, and record them in the job file so a future power event does not mean re-diagnosing from zero.
- Battery backup degradation in Plano summer heat. The sealed lead-acid batteries in Ghost Controls backup systems age faster in 100°F-plus enclosures. We see two to three years of useful life in Plano conditions where the manufacturer’s generic documentation assumes a milder climate. We load-test the batteries on every visit and replace them when they cannot hold a full open/close cycle under load.
BeforeAfterGhost Controls Parts & Our Repair-vs-Replace Approach
We use genuine Ghost Controls control boards, swing arms, and limit switches whenever the repair depends on factory-spec timing or torque values. Those components are calibrated to each other, and an aftermarket board that is “close enough” will not behave the same way when the gate meets an obstruction or runs through its deceleration ramp. For structural wear items, we take a different view. Heavy-gauge aftermarket hinges, bracket plates, and battery boxes often outlast the OEM versions, especially in Plano’s clay-shift conditions and hard-freeze cycles. We tell you which parts are going on and why before we start.
Our rule is simple: if a gearbox or control board replacement approaches 60% of the cost of a new operator, we quote both options and let you decide with the numbers in front of you. We do not steer toward replacement when a repair will hold. We also do not patch a failing component to make it through one more season and pretend that is a fix. The written price under Haven Standard Clause 1 covers exactly the repair we describe, and you approve it before we turn a wrench.
Our Ghost Controls Service Process - Step by Step
- 1
Diagnosis with evidence. We check the board’s fault LED pattern, meter the limit switches, inspect the photon eyes, and photograph everything we find. You get the written price after the diagnosis, not before we understand the problem.
- 2
Written scope and flat price. The Haven Standard Clause 1 applies on every Ghost Controls job: a written scope, a written flat price, and your approval before any work begins. No time-and-materials open-ended billing.
- 3
Repair or installation with factory-spec parts. We install genuine Ghost Controls boards, arms, and limit switches where timing and torque matter. Structural parts get upgraded where aftermarket pieces outlast OEM. We document part numbers as we go.
- 4
Calibration and testing. We set limits to factory travel, adjust torque, realign photon eyes, and run the gate through a full cycle with an obstruction test. The gate has to behave correctly on the first pass and the tenth.
- 5
Documented record and warranty. Before we leave, you get a photo log of every adjustment, every part number installed, and every limit-switch reading. That record stays with the job. Every repair carries our 365-Day Done Right Promise: if it is not right, we make it right, no fee, no argument, within one full year.
Ghost Controls Products We Service & Install in Plano
We service and install the full Ghost Controls lineup we encounter in Plano: the AXDP series for dual-gate swing applications, the HYPRO series for high-torque slide gates, the TSS1 heavy-duty swing arm for single gates with oversized panels, and the DTP1 dual-swing kit for paired ornamental iron driveway gates. We keep genuine Ghost Controls boards, limit switches, and photon eyes in local stock for same-day turnaround on the most common failures, and we can source arms and gearboxes fast when a job needs them. If you are replacing an older Ghost Controls unit, we quote the new operator, the power run, and any gate realignment in one written price.
We Also Service These Brands
Ghost Controls is one of nine automation brands we work on, not the only one. Our Plano technicians also service LiftMaster, Mighty Mule, and DoorKing systems, along with FAAC, BFT, Linear, Viking, and Elite, so Gate Repair for any brand is handled with the same written-price standard. That matters when a property has mixed-brand gates at different entries, or when a homeowner inherits an opener they did not choose. One company, one written price, whatever motor is already on the post.
FAQs - Ghost Controls Gate Repair Service in Plano
No. We are an independent Ghost Controls service provider, not an authorized dealer or warranty station. That independence means we repair the equipment we find rather than steering toward a brand we are obligated to sell. The trade-off is that warranty claims on parts covered by Ghost Controls’ own policy must go through their process; we provide the documented evidence and written diagnosis you need to file that claim cleanly.
Yes, for control boards, swing arms, limit switches, and anything that depends on factory-calibrated timing or torque. The AXDP and HYPRO lines are tuned around specific electrical values, and a generic board will not match them. For structural wear items like hinges and bracket plates, we install heavy-gauge aftermarket parts where they outlast the OEM versions in Plano conditions. We show you the part number before it goes on, and it is in your photo record when we leave.
The photon beam safety eyes have lost alignment, usually because the gate post has shifted on Plano’s clay soil, a common reason we get calls for Ghost Controls Gate Repair in Far North Dallas, TX and surrounding areas. The beam pair sits across the gate opening, and even a degree of post tilt breaks the infrared path. The board interprets that as an obstruction and reverses the gate. We realign both eyes and, if the post has moved enough to matter, re-plumb the post rather than just re-aiming the beam and setting you up for the same failure next wet season. Call (972) 236-7089 and we will diagnose it on site.
Yes. The older Ghost Controls swing arms can be paired with a current control board and receiver, which opens up compatibility with newer keypads, phone-app modules, and HTTPS remote controls. We quote the board swap, the accessory hardware, and the reprogramming as one written price. The limit settings and torque calibration get redone after the board swap, and we photograph the new settings for your record.
You are hearing the motor apply power to a gearbox that cannot turn the drive sprocket. The causes we see most in Plano are a V-track packed with decomposed granite fines, a seized drive bearing, or stripped gearbox teeth after months of dragging through a clogged track. We clear and re-grade the track, check the bearings, and inspect the gearbox before quoting anything. The written price covers exactly what we find.
Most Ghost Controls service in Allen and Plano repairs fall between $180 and $650 depending on what failed. A photon eye realignment or limit-switch reset is on the lower end. A genuine Ghost Controls AXDP control board replacement typically runs $325 to $480 installed. A HYPRO gearbox replacement, if the teeth are stripped, usually lands between $450 and $650 with track clearing included. You get the exact flat price in writing before we start, not a range and not a surprise. Call (972) 236-7089 for a free estimate, and bring any written quote from another company; we will review it at no charge.
Usually, yes. The limits have drifted from their set points when the board rebooted after the power event. We reset the open and close limits, recalibrate the deceleration ramp, and photograph the new positions. The board itself is normally fine. If the limit potentiometers are damaged or the board will not hold settings, we will tell you after testing and quote the board replacement as a separate line item.
We see two to three years of useful life from Ghost Controls sealed lead-acid backup batteries in Plano enclosures, where 100°F-plus summers accelerate the chemistry. In a climate-controlled garage or shaded enclosure, three to five years is possible. We load-test backup batteries on every service visit and replace them when they cannot complete a full open/close cycle under load. If your gate has gone dead during an outage, the battery stack is the first thing we check after the transformer.
Book Your Ghost Controls Service in Plano, TX
You will get a written flat price before any work starts, a photo record when we leave, and a full year of coverage under the 365-Day Done Right Promise. Call (972) 236-7089 and a live person answers, any hour, every day. Free estimates, free second opinions on any written quote from another company, and no charge for the diagnosis when we do the work.
Written by Adrian Vance, Owner at Vance Gate Repair Plano, serving Plano since 2014.