Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Carrollton
A new driveway gate in Carrollton runs $2,800-$7,500 installed, depending on whether you need a single swing gate, a double gate, or a sliding gate on a track. We install all of them, and we hand you a written price before any work starts. If you’re off Josey Lane, near Hebron High, or tucked into a subdivision west of I-35E where the original iron gate has finally given out, call (972) 236-7089 and we’ll come measure.
Carrollton’s gate stock is old. Thirty to forty years old in most neighborhoods, and it’s failing on a schedule. We know this because we work these streets every week, and we stock parts for the operators those 1980s and 1990s HOAs actually installed. That’s the difference between a shop that guesses and one that shows up with the right board and the right hinge on the truck.
Why Vance Gate Repair Plano Is Carrollton’s Preferred Gate Installation Company
We don’t claim to be everyone’s favorite. We claim something more specific: we price in writing before we touch a tool, and we leave a photo record of every adjustment. That habit came from commercial access-control work Adrian Vance started in 2014, and it carries into every residential driveway gate in Carrollton.
What Carrollton homeowners tell us they like: the quote sheet. You get a flat price, a written scope, and the gate hardware we intend to use, all before you approve anything. No handshake estimate that quietly grows. If another company already gave you a written estimate, bring it in and we’ll review it at no cost. We’ll tell you honestly if it’s fair, if it’s missing something, or if you’re about to overpay.
Technicians are background-checked and uniformed. You get a name and photo before arrival. And a live person answers the phone 24/7 at (972) 236-7089. Not a callback queue, not a voicemail tree.
Our Gate Installation Services in Carrollton
Every Carrollton gate replacement starts with the post footings. If the footing has shifted in the clay, a new gate on an old post will sag within two seasons. We check that before we quote, because the honest answer is sometimes “new posts and new gate,” not “new gate on the old post.”
Driveway Gate Installation
Driveway gates are the most common full replacement in Carrollton, especially in the HOA neighborhoods west of I-35E and north of Belt Line Road built between 1975 and 1995. Those original ornamental iron gates are now 30-40 years old, and the chain-drive operators behind them are obsolete. We install new single and double driveway gates, match the HOA’s iron design where required, and pair them with current LiftMaster or Viking operators plus UL 325-compliant safety photocells.
Pedestrian Gate Installation
Pedestrian gates get ignored until the latch fails and the gate swings open into the yard. In Carrollton, we often find the frame still solid but the post corroded below grade. We replace the pedestrian gate, set a new steel post where needed, and install a magnetic latch with a keypad or intercom tie-in if the HOA entry uses one.
Sliding Gate Installation
Sliding gates make sense on narrow Carrollton lots where a swing gate would eat the whole driveway. We do residential cantilever slides and commercial roller slides. On the warehouse corridors near Belt Line Road and the I-35E/Sam Rayburn Tollway intersection, many of those late-1990s sliding gates still run Apollo or Mighty Mule operators with parts that are hard to source. If the gate itself is square and the track is sound, we can often replace just the operator and the trolley bracket. If the track has settled, we’ll say so and price the full slide gate swap.
Swing Gate Installation
Swing gates are what we see most across Carrollton, and they fail in predictable ways here. The north Texas Blackland Prairie clay heaves every spring, and a poured footing that was barely adequate in 1988 is now moving enough to throw the gate out of plumb. We replace swing gates with properly sized steel posts set below the active clay zone, and we pair them with operators sized for the gate’s actual weight, not the old nameplate’s optimistic number.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Carrollton
We work on whatever motor is already on the property. If you have a LiftMaster on the driveway and a Viking on the perimeter, that’s fine; we stock repair parts for both. We service nine automation brands total, including FAAC, Elite, and Mighty Mule, and we won’t push you toward a full operator replacement when a board or a limit-switch module puts it right. That matters in Carrollton, where the existing operators are old enough that the first three shops you call might insist on a brand-new motor before they’ll even look at it.
Common Gate Installation Problems We See in Carrollton Homes
- Footings that moved in the clay. Carrollton sits on Blackland Prairie soil that swells in spring and cracks in July. A gate post set in a shallow pour shifts with it, and the gate starts binding or dragging. We re-pour the footing deeper than the original, below the shrink-swell zone, before we hang a new gate.
- Dead control boards from Winter Storm Uri. Hundreds of Carrollton operators died in the February 2021 freeze. Many homeowners are still running patched boards that fail again the next hard freeze. We replace the board with one rated for the actual temperature range North Texas sees, not the mild-weather spec the original was built to.
- HOA-mandated gates with obsolete parts. The 1980s and 1990s perimeter gates around many Carrollton communities use operators whose parts have been out of production for a decade. Chasing discontinued motors is a money pit. A full gate and operator swap is often cheaper over three years than the third board replacement in two.
- Iron frames corroded below grade. The ornamental iron on Carrollton’s older gates rusts from the bottom up, where the post meets the soil. By the time the sag is visible from the street, the post has usually lost a quarter inch of steel below ground. We inspect the post before we quote so you don’t pay to hang a new gate on a shrinking post.
Pricing for Gate Installation in Carrollton, TX
We Also Serve Cities Near Carrollton
We work throughout the I-35E corridor and up into the Dallas suburbs. Our Gate Installation crews cover Carrollton plus Addison, Coppell, Richardson, and Plano with the same written pricing and the same 365-Day Done Right Promise. If you’re on the edge of town and aren’t sure whose territory you’re in, call and ask. A live person will answer and tell you straight.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Carrollton
Why do so many Carrollton driveway gates need full replacement instead of repair?
Because the gate and its operator are both 30-40 years old, and they’re failing at the same time. A sagging iron frame on a corroded post, behind an obsolete chain-drive operator with a dead board, is three repairs stacked on top of each other. When the post footing has moved in the clay and the motor parts are discontinued, a full replacement costs less over three years than the third repair trip. We’ll tell you which one you’re actually facing. Call (972) 236-7089 and we’ll inspect the gate before we recommend anything.
Do I need to match my HOA’s gate design when replacing in Carrollton?
Yes, if your HOA’s covenants specify a matching wrought-iron design or a specific color. Most Carrollton HOAs from the 1980s and 1990s do. We work with the HOA’s architectural review requirements, take measurements and photos before quoting, and we’ve matched enough of these iron designs that the association signs off the same day. Bring us the HOA’s gate spec or the neighbor’s gate photo and we’ll match it.
What is UL 325 entrapment protection, and does my new Carrollton gate need it?
UL 325 is the national safety standard that requires gate operators to reverse or stop if something crosses the path of the gate. Every new gate operator we install in Carrollton must include entrapment protection; usually that’s a set of photo-eye sensors at the low point of travel, plus enough gap coverage that a child or a dog can’t be pinned. This isn’t optional. It’s code, and it’s why we won’t hang an old operator without verifying its safety edge and photo-eye. The documentation we leave after every install includes a photo log of the safety devices where they’re mounted.
Can you replace just the operator on a commercial sliding gate near Belt Line Road without changing the gate itself?
Usually yes, if the gate is square and the track is sound. Many of the sliding gates along Belt Line Road and the I-35E/Sam Rayburn intersection run late-1990s Apollo or Mighty Mule operators whose boards and trolley brackets are now hard to source. We stock Apollo 1500 series boards and compatible slide-gate trolley brackets, so we can often swap the operator and the board in an afternoon without touching the gate frame. We’ll tell you if the track has settled enough that a new operator would just eat itself. Call (972) 236-7089 and we’ll walk the site first.
How do Carrollton’s clay soil and droughts affect my gate’s foundation?
Carrollton’s Blackland Prairie clay shrinks and swells by several inches through the year. Spring rain saturates the soil and the clay heaves. July and August drought cracks it open and the ground drops. A gate post set shallow gets worked loose like a tooth, and the gate starts dragging or failing to latch. That’s why our new post footings in Carrollton go deeper than the original pour: below the active shrink-swell zone. If you’re seeing a gap at the latch or a gate that binds only in August, the footing has likely moved. Call (972) 236-7089 and we’ll confirm it before you pay for a new gate.
We recently replaced a chain-drive swing gate on a home off Josey Lane near Hebron High where the original hinge post had corroded below grade and caused a 4-inch sag correction that kept failing. After confirming the post footing had shifted in the black clay, we set new steel posts, hung a fresh residential gate, and paired it with a LiftMaster operator and safety photocells. The HOA signed off on the matching iron design the same day.
That’s the job we do in Carrollton: old gate stock, shifting clay, and operators that died in the freeze. We fix the whole problem, not the symptom that showed up this spring. Call (972) 236-7089 and we’ll put the price in writing before any work starts.
Written by Adrian Vance, Owner at Vance Gate Repair Plano. Adrian founded the company in 2014 after years of commercial access-control work, and he’s been documenting gate repairs with the same rigor ever since.