Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Allen, TX
Gate access control in Allen usually means one of two things: a keypad or intercom that stopped talking to a gate that was installed when the house was built, or an HOA requirement that forces a specific system whether you want it or not. We work on both. And because so many Allen homes went up between 1988 and 2015 inside HOA-governed communities like Twin Creeks, we see the same gate generations fail in the same predictable ways, which means we usually know the fix before we pull into the driveway. Call (972) 236-7089 and a live person answers.
Why Allen Homes Are Different
Allen sits on North Texas expansive black clay, the Vertisol soil that swells after spring rain and contracts hard in July and August. That annual heave-and-shrink cycle tilts gate posts out of plumb faster than almost any other soil type in the country. Builders in Allen’s 1990s subdivisions frequently set gate posts in footings only 24 inches deep, which was fine in stable soil but is a ticking clock here. We routinely find posts shifted 3 to 5 degrees out of plumb within a decade, which is why a gate that drags or won’t latch is often a footing problem, not a hinge problem.
Allen’s housing stock is overwhelmingly brick-veneer single-family, built between roughly 1988 and 2015, almost all of it inside HOA communities with mandated cedar or ornamental iron gates. That means two things. First, we stock parts for the exact gate hardware generations those builders used, so repairs move faster. Second, almost every gate repair in Allen requires at least a nod to HOA standards, which govern material, finish, and style. We navigate that paperwork routinely.
Our Main Allen Services
Allen homeowners call us most often about three things: a gate that stopped opening, a gate that needs replacing, and a motor that quit. Each has its own page with the full breakdown.
Gate Repair in Allen
Most gate repair in Allen comes down to what the clay soil did to the posts or what the hail did to the panels. We reset posts in deeper footings, replace split cedar slats, straighten bent ornamental aluminum, and re-hang gates that racked out of square. Every job gets a written price before we touch a tool. See the full scope on our Gate Repair in Allen page.
Gate Installation in Allen
New gate installation in Allen almost always starts with the HOA. We help pull together the finish and style requirements, then build or order the gate to match. Cedar and ornamental iron are the two big ones here. Footing depth gets corrected on every new install so the clay doesn’t undo the work in five years. Details are on the Gate Installation in Allen page.
Gate Motor & Opener in Allen
When the gate won’t move but the hinges look fine, the motor is usually the culprit. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we repair what’s on the property rather than steering you toward a replacement. Full diagnostic and repair scope lives on the Gate Motor & Opener in Allen page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Allen
Gate access control in Allen means the keypads, intercoms, card readers, and phone-entry systems that tell the gate when to open. In HOA-heavy neighborhoods like Twin Creeks and the subdivisions off Stacy Road, these systems often get installed at build-out and then ignored for a decade. When the keypad finally dies or the intercom stops ringing through, the homeowner discovers the original installer left no wiring diagram and no record of what was actually connected. That’s where we come in. We document everything we find, photograph every connection, and leave you a record that any future technician can use. For the full scope of access control work, see our Gate Access Control hub.
Keypad Entry
Signs you need it
The keypad works intermittently, some buttons don’t register, or the code stopped accepting after a heavy rain.
What it costs in Allen
Keypad replacement in Allen typically runs $185 to $420 depending on whether it’s a simple standalone pad or a multi-user system tied to a controller.
How we do it
We test voltage at the keypad, pull the old unit, mount and seal the new one, program your codes on site, and photograph the wiring before we close the box.
Video Intercom
Signs you need it
The screen stays dark, the call button doesn’t ring inside, or the camera shows a blank feed even though the gate still opens.
What it costs in Allen
Video intercom replacement in Allen typically runs $640 to $1,125 depending on whether the wiring is intact or needs a new data run.
How we do it
We test the existing wiring first, then either reuse it or pull new cable, mount the new station, pair it with your house handsets or app, and photograph the final terminations.
Phone Entry
Signs you need it
The call rings to a number that no longer exists, or visitors report the line is dead even when the keypad still opens the gate.
What it costs in Allen
Phone entry system repair or replacement in Allen typically runs $460 to $895 depending on whether the unit is a cellular dialer or a hardwired landline version.
How we do it
We identify the dialer type, replace or reprogram the unit, update the call-forwarding number, and test the full call-to-open sequence before we leave.
What Gate Access Control Costs in Allen
| Item | Typical range in Allen |
|---|---|
| Keypad replacement | $185 - $420 |
| Video intercom replacement | $640 - $1,125 |
| Phone entry repair or replacement | $460 - $895 |
Does Allen require anything special for gate access control?
Most Allen HOAs require that gate hardware match the community’s original spec, which usually means a specific brand or finish. We pull the HOA requirements before recommending equipment, and the written price reflects what the HOA actually allows.
Can you replace just the keypad without touching the gate motor?
Yes. Keypads often pair directly with the existing controller, so we can replace the pad and reprogram codes without disturbing the motor or limit settings. Call (972) 236-7089 for a written quote before anyone starts work.
Gate Parts & Welding in Allen
Gate parts and welding in Allen is usually about what the clay soil did to the structure. When a post shifts, the hinge tears out or the gate racks, and the fix is not a bolt-on part but a weld, a re-set, or both. The 1990s-era subdivisions here share common hardware lines, so we keep the hinges, rollers, and brackets those communities actually use. For the broader scope of parts and fabrication work, see our Gate Parts & Welding hub.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the ground on one corner, or the hinge pin has worn an oval hole in the bracket.
What it costs in Allen
Hinge replacement in Allen typically runs $145 to $380 depending on gate weight and whether the post face is still sound enough to hold the new hardware.
How we do it
We prop the gate, cut or unbolt the old hinges, check the post for rot or corrosion, weld or bolt the new hinges, and square the gate to the opening.
Post Replacement
Signs you need it
The post leans visibly, the gate no longer latches, or you can rock the post by hand even though the gate itself looks fine.
What it costs in Allen
Post replacement in Allen typically runs $420 to $940 depending on footing depth, post material, and whether the old concrete needs full excavation.
How we do it
We dig out the old footing, set the new post in concrete at a depth suited to Allen’s clay, brace it plumb, and re-hang the gate once the footing has cured.
What Gate Parts & Welding Costs in Allen
| Item | Typical range in Allen |
|---|---|
| Hinge replacement | $145 - $380 |
| Post replacement | $420 - $940 |
| Custom welding repair | $220 - $610 |
Do you weld ornamental iron gates in Allen?
Yes. We weld ornamental iron and aluminum gates on site, including cracked rails, broken pickets, and torn hinge brackets. The written price you get before we start covers the full weld and clean-up.
Can you match the finish after welding?
We grind the weld smooth, prime it, and match the existing finish as closely as the material allows. On HOA gates, we document the color and finish before we touch anything. Call (972) 236-7089 for specifics.
Brands We Service in Allen
We service Linear, Viking, Ghost Controls, and DoorKing, along with five other major gate automation brands. We stock common Allen parts locally so most repairs don’t wait on a shipment. See our brands for the full list and what we keep on the truck.
Pricing for Gate Repair in Allen, TX
| Service | Typical range in Allen |
|---|---|
| Hinge replacement | $145 - $380 |
| Post replacement | $420 - $940 |
| Custom welding repair | $220 - $610 |
| Keypad replacement | $185 - $420 |
| Video intercom replacement | $640 - $1,125 |
| Phone entry repair or replacement | $460 - $895 |
| Swing gate motor replacement | $850 - $1,600 |
| Slide gate motor replacement | $950 - $1,850 |
The biggest price variable in Allen is what the clay soil has done to the posts. If the footing is still sound, most repairs stay in the lower half of these ranges. If the post has shifted and needs a full re-set, the number climbs accordingly. Either way, the price is written and agreed before any work begins, and it does not change at the end.
Neighborhoods We Serve in Allen
We work across Allen, from Twin Creeks to the communities along Exchange Parkway and Stacy Road. Most Allen calls get a technician dispatched the same day, usually within two to three hours of the call.
- Twin Creeks
- Watters Crossing
- Star Creek
- Lost Creek Ranch
- Cottonwood Bend
Service Area - Cities Near Allen
We serve Allen and the surrounding Collin County cities, including Plano, TX, McKinney, TX, Wylie, TX, and Richardson, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Allen locally every day of the week.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Allen
Most Allen calls get a same-day dispatch, typically within two to three hours. A live person answers the phone at (972) 236-7089 any hour, and we give you the technician’s name before they arrive.
For repairs that match the existing gate, usually not. For replacements, color changes, or any visible modification, your HOA may require prior approval. We handle the documentation and can supply written specs and photos to support your request.
Post shifting from the expansive clay soil is number one, followed by hail damage to cedar slats and aluminum panels, and then motor failures from power surges during spring storm season. We address all three routinely across Allen.
If your gate is dragging, stuck, or refusing to open, call (972) 236-7089 for a free estimate and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Allen Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.