Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Plano, TX
Gate access control work in Plano usually means one of two things: a keypad or phone-entry system on an ornamental iron driveway gate that stopped responding, or an HOA entry gate whose card reader quit mid-day. The housing stock here, much of it built between 1985 and 1999, was outfitted with gate automation that is now hitting the end of its service life all at once. Add Plano’s expansive black clay soil tilting posts seasonally, and you get control boards, keypads, and photo-eyes failing faster than they would on stable ground. Call (972) 236-7089 and we’ll tell you the straight diagnosis, usually over the phone.
Why Plano Homes Are Different
Plano’s mid-1980s through late-1990s building boom produced whole corridors of master-planned subdivisions behind ornamental iron gates, especially west of US-75 around Legacy Drive. Those gates are now 25 to 35 years old. The original automation, often swing-arm openers from that era, is failing in clusters. What makes Plano genuinely different is the soil. Blackland Prairie clay expands after a hard rain and shrinks during a Texas drought, and that cycle physically moves gate posts. We see gates that were square a year ago binding at the latch because the post drifted two degrees. HOA covenants in these neighborhoods also regulate what you can and cannot change: many require matching original ironwork finish and panel style, and some demand architectural committee approval before a control board swap. That’s not friction; it’s just how Plano works, and we plan for it.
Our Main Plano Services
The two gate services Plano homeowners call us for most often are access control and parts-and-welding work, and we route full-service repair, installation, and motor jobs through their own dedicated Plano pages.
Gate Repair in Plano
Repair is what happens when the gate works fine for years, then one day it doesn’t. In Plano, the most common failure is a post that has tilted on clay soil and pulled the gate out of travel, followed closely by hinge wear and rust at the weld points. We diagnose the actual cause rather than treating the symptom. Gate Repair in Plano has the full breakdown of what we check and what it costs.
Gate Installation in Plano
A new gate in Plano means a site-specific plan, not a stock panel bolted to whatever post exists. Clay soil means the posts need deeper, wider concrete footings than a sandy-soil city would require. The measured, written quote we hand you before any work starts is the core of how we operate. Gate Installation in Plano covers what the job involves here.
Gate Motor & Opener in Plano
Plano’s freeze-thaw and bake cycles are hard on opener gearboxes and control boards. When a motor fails, the question is rarely just the motor: the post alignment has to be verified first. Replacing an opener onto a tilted post just burns the new motor out within a season. Our Gate Motor & Opener in Plano page details the motor brands we service and the repair versus replacement math.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Plano
Gate access control in Plano covers the systems that decide who gets in: keypads, remotes, phone entry, card readers, and video intercoms. Homes built along the Legacy Drive corridor and west Plano from the late 1980s through the 1990s are now seeing their original access systems fail, and the failures cluster around one root cause: the clay soil has moved the post enough to misalign the photo-eye that keeps the gate from closing on something. What looks like a keypad problem is often a sensor problem. Our Gate Access Control work always starts with a full system walk so we fix the cause, not the symptom.
Keypad Entry
Signs you need it
The keypad backlights but won’t trip the relay, a code works sometimes but not others, or the membrane has cracked from Texas sun and heat.
What it costs in Plano
Keypad replacement on a Plano driveway gate typically runs $180-$420 installed, depending on whether the new unit is wired or wireless and what brand the existing opener uses.
How we do it
We pull the old keypad, verify the control board is delivering voltage, wire the new unit, program the codes, and photograph the finished mounting.
Phone Entry
Signs you need it
The call rings but the gate won’t open, the dial tone is intermittent after rain, or the unit’s weather seal has failed and moisture is inside the housing.
What it costs in Plano
Phone entry system repair in Plano runs $220-$480; a full replacement with a new cellular or VoIP unit runs $600-$1,100, including programming.
How we do it
We bench-test the existing phone unit, confirm the relay connection to the opener, replace the weather seal or the whole unit, and leave you a written record of every setting.
Video Intercom
Signs you need it
The video feed freezes in high heat, the intercom audio drops out when the gate moves, or the camera lens has clouded over from UV exposure.
What it costs in Plano
Video intercom repair in Plano spans $180-$520 depending on whether it’s a wiring fault, a bad monitor, or a camera replacement affected by the clay-soil post shift putting stress on the cable conduit.
How we do it
We test each component in the chain, replace only what failed, re-align the camera, and document the before and after settings.
What Gate Access Control Costs in Plano
| Item | Typical range in Plano |
|---|---|
| Keypad replacement | $180-$420 |
| Phone entry repair | $220-$480 |
| Video intercom component repair | $180-$520 |
Can you reprogram my existing keypad instead of replacing it?
Yes, if the keypad circuitry still functions. We’ll reprogram and re-seal it for about half the cost of replacement. If the membrane is cracked, replacement is the better long-term fix in Plano heat.
Does my HOA need to approve an access control change?
In many west Plano master-planned communities, yes for visible components like keypads or intercoms. We can provide the spec sheet and dimensions your architectural committee needs before you file.
Gate Parts & Welding in Plano
Gate parts and welding in Plano is the work nobody sees until the gate starts dragging. The two biggest drivers here are rust from humidity and the unforgiving clay soil that racks gates out of square. On 25-to-35-year-old ornamental iron, the failure is usually at the hinge weld or the point where the opener arm brackets to the gate frame. Our Gate Parts & Welding service repairs or replaces the failed part rather than pushing you toward a new gate.
Hinge Replacement
Signs you need it
The gate sags at the free end, scrapes the ground in summer after the clay dries, or the hinge pin has visible play when you lift the leaf.
What it costs in Plano
Hinge replacement on a Plano ornamental iron gate runs $120-$280 per hinge, including removing the old weld and welding in the new one.
How we do it
We brace the gate, cut out the old hinge, weld in the replacement, and re-set the gate’s alignment before photographing the finished weld.
Post Replacement
Signs you need it
The gate binds at the latch even after the hinges check out, the post is visibly out of plumb, or the gate swings freely in one season and binds in the next.
What it costs in Plano
Post replacement in Plano runs $350-$850 per post, and the range reflects the deeper concrete footing required in Blackland Prairie clay.
How we do it
We excavate the old post and footing, pour a new footing sized for Plano’s expansive soil, set the post plumb, and remount the gate.
What Gate Parts & Welding Costs in Plano
| Item | Typical range in Plano |
|---|---|
| Hinge replacement per hinge | $120-$280 |
| Post replacement per post | $350-$850 |
| Custom weld repair | $110-$300 |
Can you match the finish color of my existing ironwork exactly?
Yes. We powder-coat matched to the original Plano subdivision spec where required. Some HOAs require the exact color code from your community’s design guidelines, and we can work with that.
Do you do small welding repairs, or is it full parts only?
We do small weld repairs. A cracked scroll or a broken gate latch on an older ornamental iron gate is exactly the kind of job we handle same week, not a job we’ll try to upsell into a full gate.
Brands We Service in Plano
We service gate automation from LiftMaster, FAAC, Elite, Mighty Mule, and the other major brands, and we stock common parts locally so a Plano repair doesn’t wait on a two-week freight order. Most component replacements are done same visit. See our brands for the full list.
Pricing for Gate Repair in Plano, TX
| Service | Typical range in Plano |
|---|---|
| Keypad replacement | $180-$420 |
| Phone entry repair | $220-$480 |
| Video intercom repair | $180-$520 |
| Hinge replacement per hinge | $120-$280 |
| Post replacement per post | $350-$850 |
| Custom weld repair | $110-$300 |
Two things push a Plano gate job higher: the clay soil requiring a deeper footing for any post work, and HOA architectural requirements that force exact material and finish matching. Whatever the final number is, you get it in writing before we start, and it does not change mid-job.
Neighborhoods We Serve in Plano
We work the whole city, and in practice most of our calls come from the older, gate-heavy subdivisions west of US-75.
- Legacy Drive corridor
- West Plano
- Willow Bend area
- Lakeside on Preston
- Deerfield
Depending on where you are in Plano, a technician generally reaches you within a couple of hours for a same-day service call.
Service Area - Cities Near Plano
We regularly schedule gate work in the cities around Plano. That includes Allen, TX, Richardson, TX, Addison, TX, and Carrollton, TX, where the same clay-soil conditions and similar housing-era gates show up every week.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Plano
Most Plano calls are same-day or next-day. We keep local parts inventory for the common failures, and your written price is handed over before any work begins, never after.
Routine repair and part replacement on an existing gate generally does not require a permit. Post replacement or a full new gate installation may, depending on location and HOA. We can confirm before starting.
We don’t file HOA paperwork for you, but we provide the spec sheets, finish codes, and dimensions your community’s architectural committee needs to approve the work quickly. Call (972) 236-7089 for a free estimate or a second opinion on another company’s written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Plano Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.