Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Dallas
Gate installation in Dallas runs $2,400 to $11,000 for most residential projects, depending on gate width, automation, and what we find when we dig. A standard single swing gate with a quality operator typically lands between $3,200 and $5,800 in this market. You’ll get a written price before any work starts, not a phone estimate and a surprise invoice. Call (972) 236-7089 and a real person answers, any hour.
We’ve installed gates in Preston Hollow, Lakewood, Bluffview, and across the 1990s and 2000s master-planned communities that line the Dallas North Tollway corridor. The soil here is the defining factor. Blackland Prairie clay moves, and if your posts were not set deep enough, that brand-new gate leans before its first birthday. That’s the first thing we check, and it’s the conversation every Dallas homeowner should have with any installer they call.
Why Vance Gate Repair Plano Is Dallas’s Preferred Gate Installation Company
Adrian Vance founded this company in 2014 after years of commercial access-control work, and he carried over a habit that most residential gate companies never bother with: documentation. Every Dallas job leaves with a written record of what was found, what was set, and what was installed. Photos, wiring diagrams, limit-switch readings. No future technician guesses, and you never pay twice to rediscover the same problem.
Our Dallas customers call us because the price is in writing before anyone picks up a tool. That’s Haven Standard Clause 1 and it’s non-negotiable. If another company handed you a verbal estimate, bring us the paperwork and we’ll give you a free second opinion on it.
We dispatch background-checked, uniformed technicians to every Dallas neighborhood. You’ll know the name and see the photo of the person arriving before they pull into your driveway. And every completed job carries our 365-Day Done Right Promise: if the work is not right within a full year, we fix it at no charge, no argument.
Our Gate Installation Services in Dallas
We install and automate residential gates across Dallas, and we work on whatever is already on the property rather than steering you toward a replacement you do not need. Here are the services that matter most in this market.
For a broader look at what we offer, our Gate Installation team covers every type of gate and operator on residential and light commercial properties.
Driveway Gate Installation
Driveway gates in Dallas carry a specific structural requirement: the post on either side has to survive Blackland Prairie clay. We set posts in concrete footings typically 24 inches in diameter and 42 to 48 inches deep, well below the freeze-thaw line and below the zone where expansive clay heaves. A driveway gate that is plumb today and leaning in 18 months was almost always set too shallow by the previous installer.
We install steel, wrought iron, aluminum, and wood driveway gates, manual or automated. If you are adding automation to a gate that has been manual for years, we check post plumb first, then spec the operator to the gate’s weight and cycle frequency.
Slide Gate Installation
Slide gates are common on wider Dallas driveways where a swing gate would eat too much of the yard or conflict with the slope. These installations need a level track or a cantilever design, and on Dallas clay, the track bed matters more than the gate itself. We dig out and properly base the track zone so it does not heave and bind the gate within a season or two.
We install cantilever slide gates, V-track slides, and automated slide systems with operators from Linear, Viking, DoorKing, and others. The operator is sized to the gate mass, not the other way around.
Pedestrian Gate Installation
Pedestrian gates in Dallas get used harder than people expect. They swing constantly, they get pulled by kids and delivery drivers, and they are almost always installed with shallow posts. We set pedestrian gate posts at minimum 36 inches deep in Dallas, with concrete collars, and we use hinges and closers rated for the gate’s actual daily cycle count.
If the pedestrian gate is part of a larger automated entry, we coordinate the operator, keypad, and safety sensors so the two systems work together instead of fighting each other.
Swing Gate Installation
Single and double swing gates remain the most common choice in Dallas’s established neighborhoods. Preston Hollow, Lakewood, Bluffview, and the M Streets are full of them. The critical variable is the same as everywhere else in this city: hinge post depth. We set posts to 42 to 48 inches on swing gates because the clay movement will bind an underset gate against its operator within a few rain-drought cycles.
We also handle the details that separate a good swing gate from one that binds: hinge alignment, travel stops, positive close mechanisms, and operators from Ghost Controls, LiftMaster, and DoorKing that are tuned to the gate’s leaf weight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Dallas
We install and service operators from nine gate-automation brands, including Linear, Viking, Ghost Controls, and DoorKing. In Dallas, we stock common parts for these brands locally, which means faster turnaround when an operator board fails or a limit switch drifts. We do not push you toward one brand. We spec the operator that fits the gate you already have, the weight it carries, and how many cycles it runs each day.
That matters in Dallas because builder-grade operators from national production builders fail early here. The heat and the clay-soil racking stress plastic gear housings and drift limit switches within a few years. We replace them with equipment sized for the gate, not whatever was cheapest on the tract builder’s bid sheet.
Common Gate Installation Problems We See in Dallas Homes
- Shallow posts heaving in Blackland Prairie clay. Posts set at 24 inches, which was common on 1990s tract installs, tilt visibly within three to five drought-and-rain cycles. We re-dig and reset the post at 42 to 48 inches, and that post holds plumb for decades.
- Builder-grade operators dying early. In 1990s to 2010s master-planned communities across far north Dallas, the original operators were spec’d for price, not for the gate’s actual weight or Dallas’s summer heat. Plastic gear housings crack and limit switches drift within three years.
- No power or conduit run to the gate. Retrofits on older Dallas homes often have no electrical rough-in at the gate location. That leaves homeowners running extension cords or burying shallow Romex, which trips breakers in storms. We run proper conduit at code depth and terminate it correctly.
- HOA mismatches on retrofit automations. HOAs in Dallas’s master-planned communities often require the gate and operator to match community aesthetics and brand approvals. We pull the HOA requirements before we quote, so you do not install something the association makes you remove.
Pricing for Gate Installation in Dallas, TX
Here are honest Dallas numbers, not “call for pricing” runaround. A single automated swing gate on an existing driveway typically runs $3,200 to $5,800 installed, including the operator, safety photocells, and a written record of every setting. A double swing gate runs $5,500 to $9,500 depending on gate material and operator grade. A sliding gate installation lands between $6,000 and $11,000 because the track, base, and cantilever structure add real labor and material. Pedestrian gate installation runs $900 to $2,600 including post setting and hardware.
If your existing posts are underset in Dallas clay, re-digging and resetting a single post adds $800 to $1,500 per post depending on access and concrete volume. We’ll write that into the quote, not spring it on you mid-job.
Every estimate is free. The written price is yours before we start, and it is the price you pay unless you approve a change in writing. Call (972) 236-7089 for an exact quote on your gate.
We Also Serve Cities Near Dallas
Beyond our Gate Installation in Dallas coverage, our crews work regularly in Irving, Addison, Richardson, and Carrollton. Schedule us through the same phone number, (972) 236-7089, and you’ll get the same written pricing and documentation on every job.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Dallas
Because the posts were set too shallow for Dallas’s Blackland Prairie clay. When the clay swells after spring rain and shrinks hard in the summer drought, a post set at 24 inches will heave and tilt within a few cycles. The fix is to pull the post, auger a 42 to 48-inch hole, and set it in a 24-inch concrete footing. That’s the depth that holds plumb in this soil. If your gate is leaning, call (972) 236-7089 and we’ll assess the post depth before quoting any repair.
Yes. HOA matching requirements are common across Dallas’s master-planned communities, and we handle them by pulling the HOA requirements before we quote. That means the operator housing, gate finish, and any cladding are spec’d to the association’s standards, not whatever we have on the truck. Bring us the HOA documentation when you call for your estimate.
Only if you want the gate to open automatically for vehicles. A loop detector is a wire buried in the driveway that senses the metal mass of a car and triggers the gate. For a purely keypad or remote-controlled swing gate on private property, you do not need one. For shared driveways, or if you want exit sensing, we install loop detectors and set the sensitivity for Dallas’s clay conditions, which affect how consistently the loop reads over time.
Minimum 42 inches, and we prefer 48 for swing gate hinge posts and any post wider than six feet of gate leaf. Anything under 36 inches is a future lean waiting to happen. The previous standard of 24 inches, common on 1990s installs in Dallas, fails predictably here within a few rain-drought cycles. We set posts below the highest heave zone and pour a concrete footing that anchors the post against lateral racking.
You can, but a double gate with any real weight or daily cycle count will drain a solar battery fast in Dallas’s summer, especially if the panel gets partial shade. Solar operators work best on single gates with light-duty usage. If you are set on solar, we’ll spec a panel sized for your gate’s actual draw and add a battery with enough capacity for Dallas’s cloudy stretches. For double gates that cycle often, a hardwired operator is more reliable. Call (972) 236-7089 and we’ll spec the right option for your gate.
One More Thing About Dallas Gate Installation
Dallas sits on the Blackland Prairie, and that is the real spine of every gate decision in this city. The clay swells after rain and shrinks during drought, and it does this on a cycle that catches every shallow post. In Preston Hollow, we installed a LiftMaster LA400 swing gate operator on an older wrought-iron driveway gate that had been manual for decades. The left hinge post had leaned two inches out of plumb from the clay movement. We pulled it, augered a new 48-inch hole, set the post in a 24-inch concrete footing, then mounted the operator and added a safety photocell. No sag correction needed, because the post was finally right.
That is the Dallas gate installation conversation most companies skip. They quote the gate and the operator and never mention what is underneath. We start with the soil, because that is what determines whether your gate is plumb for a decade or leaning by next spring.
Call (972) 236-7089 for a free estimate. Written price before any work starts. A live person answers, 24 hours a day.
Written by Adrian Vance, Owner at Vance Gate Repair Plano, serving Dallas with documented gate installation since 2014.
Gate Installation in Nearby Areas
