Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Irving
New gate installation in Irving usually runs between $2,800 and $9,500 for a driveway gate, depending on whether it’s a swing or sliding design, the material, and whether automation is included. The two biggest variables in Irving aren’t the gate itself: they’re HOA architectural approval and the Blackland Prairie clay under your posts. Get either wrong and you’re redoing the job in two seasons. We handle both from the first site visit. Call (972) 236-7089 and we’ll walk the property, measure the opening, check the soil line, and hand you a written price before any work is scheduled.
Why Vance Gate Repair Plano Is Irving’s Preferred Gate Installation Company
Irving has two completely different gate markets sitting side by side. North Irving and Valley Ranch are filled with 1970s-to-1990s homes where the gate opening may still have the original steel hinges and a post that’s been heaving for twenty years. Five minutes south, Las Colinas is a different world: corporate campus slide gates logging hundreds of cycles a day, and HOA communities with ornate aluminum entrances that have to match an approved architectural standard. We work both. Since 2014, Gate Installation work across the metro has taught us that Irving homeowners don’t need a sales pitch. They need a written scope, a written price, and a record of what was installed. That’s how Vance Gate Repair operates on every job.
Our crews coordinate Irving installs from the Dallas-Fort Worth office and are familiar with the specific HOA requirements in Las Colinas, Valley Ranch, and the neighborhoods around North Lake. We show up with the gate style, finish, and hardware pre-cleared where an architectural committee is involved. That’s the part most gate companies skip until it’s too late.
Our Gate Installation Services in Irving
Driveway Gate Installation
Driveway gates in Irving range from modest chain-link or steel tube gates on the 1970s tracts to powder-coated aluminum estate gates in Las Colinas. A standard single swing driveway gate with manual operation typically runs $2,800-$4,600. Automated double swing gates start around $5,200 and run to $9,500 depending on the operator brand and access control. We quote the gate, the posts, the operator, and the wiring as separate line items so nothing is buried.
Sliding Gate Installation
Sliding gates are the default choice on narrower Irving lots where a swing gate would arc into the driveway or the street. They’re also what we install most along the SH-114 and O’Connor Road corridor in Las Colinas, where campus entry points need rack-and-pinion drives and loop detectors rated for high-cycle duty. A residential sliding gate in Irving runs $3,800-$7,600 installed. The operator is the make-or-break component, and we spec it for the cycle count the gate will actually see, not the cheapest unit that fits.
Swing Gate Installation
Swing gates remain the most common residential choice in Irving, especially in Valley Ranch and the neighborhoods off MacArthur Boulevard where the driveway has room for the arc. The soil matters more here than most people expect. We pour post footings below the clay line and use through-bolted hinge plates because a swing gate that drags after one summer is a footing problem, not a hinge problem. Double swing gate installs in Irving generally run $4,000-$8,200 with automation.
Pedestrian Gate Installation
Pedestrian gates are common across Irving’s HOA communities, especially where a community pool or trail access needs a controlled entry point that isn’t a full driveway opening. These jobs are smaller in scale but the same approval rules apply. A fabricated aluminum pedestrian gate with a magnetic lock and keypad entry typically runs $1,800-$3,400 in Irving, including the post set and hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Irving
We don’t steer Irving customers toward one brand. The operator on your gate should match the cycles it runs and the access system already in place. Our installers work with Linear, Ghost Controls, DoorKing, Viking, BFT, and the other major automation brands, so if your HOA’s existing keypad and telephone entry system is built around a specific manufacturer, we can stay within that ecosystem rather than forcing a replacement. For Irving jobs we keep common operator parts and safety components on the trucks, which means we don’t lose a day waiting on a shipped board when a control panel is wired wrong at rough-in.
Common Gate Installation Problems We See in Irving Homes
- Posts poured too shallow in expansive clay. Irving sits on Blackland Prairie clay that shrinks during summer drought and swells after fall rains. A post footing poured at eighteen inches will heave within two seasons. We spec footings below the clay line, typically 36-42 inches depending on the gate weight and panel span.
- HOA approval skipped until after the gate is hung. We’ve been called to unweld and remove gates in Las Colinas because the style, height, or finish wasn’t pre-approved by the architectural committee. The approval sequence is step one, before any material is ordered.
- Residential-grade slide operators on commercial-cycle gates. Along the corporate corridor, a slide gate can log 300 cycles per shift. A residential operator burns out in months and racks the gate out of alignment. We spec commercial-grade rack-and-pinion drives on any install that sees shuttle traffic.
- Ice storm damage to improperly configured manual-override systems. DFW ice storms are not hypothetical. If a gate is left in manual override during a freeze, the operator can burn out when power returns and the gate tries to move against seized hinges. We walk every customer through the cold-weather setting before the first freeze of the season.
Pricing for Gate Installation in Irving, TX
Here’s what Irving homeowners should expect, in writing:
| Gate Type | Typical Irving Range (Installed) |
|---|---|
| Manual single swing gate, steel or aluminum | $2,800 - $4,600 |
| Automated single swing gate | $3,900 - $6,200 |
| Automated double swing gate | $5,200 - $9,500 |
| Residential sliding gate, automated | $3,800 - $7,600 |
| Pedestrian gate with keypad and mag lock | $1,800 - $3,400 |
What moves the number: gate material and finish, whether the opening has existing posts that can be reused, the operator brand and cycle rating, and whether your HOA requires a specific style or access integration. We do not give verbal estimates. Under Haven Standard Clause 1, every Irving job gets a written price before any work begins, and that price is the price unless you change the scope. Call (972) 236-7089 for a free measure and written quote.
We Also Serve Cities Near Irving
Our gate installation crews serve Irving and the surrounding metro, including Irving neighbors in Dallas, Addison, Richardson, and Carrollton. The approval processes and soil conditions differ from one city to the next, so we adjust footing specs and HOA coordination for each job rather than running a cookie-cutter install.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Irving
Yes. In Las Colinas and most Irving HOA communities, the architectural committee must approve the gate style, height, finish, and operator placement before installation begins. We handle this for you: we pull the community’s design standards, submit the drawings and finish samples, and schedule the install only after written approval. Skipping this step gets a gate removed at your expense. If you already live in a community with an active architectural committee, we’ll coordinate directly with the management company so you don’t sit in the middle. Call (972) 236-7089 and we’ll start the approval sequence on the first site visit.
For most Irving gate installations, we pour footings 36 to 42 inches deep, below the active swell zone of the Blackland Prairie clay. Light pedestrian gates can sometimes get by at 30 inches, but any automated driveway gate on this soil should go below the clay line. The gate weight, panel length, and whether the post carries the operator all factor into the final depth. We photograph the excavation and the pour on every job so you have a record of what’s underground before the concrete cures.
Yes. We integrate new slide gates with existing access systems all the time in Irving, including DoorKing, Linear, and Viking-based telephone entry and card-reader systems already in use at HOA entrances. The key is matching the operator’s control board inputs to the existing relay logic, and matching the loop detector frequency so the gate opens when an approved vehicle approaches. We test this before final handoff and leave a wiring diagram with the management company. Call (972) 236-7089 to have a technician check your existing system’s compatibility.
Yes. For HOA communities in Irving, especially in Valley Ranch and Las Colinas, we work directly with the management company from the first submittal through final inspection. That includes the architectural review package, scheduling around school and shift traffic, coordinating power disconnects, and the final walk-through with the community’s inspector. We’ve installed gates at community entrances where the management company required photographic proof of footing depth, operator wiring, and safety sensor placement before sign-off. That’s standard practice for us. You get a copy of every photo and every approval document.
If the gate is left in automatic mode and the hinges are properly maintained, a modern operator with a built-in obstruction sensor should stop and reverse rather than strip the drive. The failure happens when a gate is put in manual override during the freeze and then an automated timer tries to move it against seized hinges when power returns. We set every Irving install with the cold-weather configuration explained in writing, and we can add a low-temperature disable option on most operators we install. If a freeze is forecast, a quick phone call to us is free. Call (972) 236-7089 if your operator acts up after an ice event.
Written by Adrian Vance, Owner at Vance Gate Repair Plano, serving Irving since 2014.